Upcoming training courses

2 - 27 Jun 2025

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able prepare and use CNC turning machines, that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

Wed 4 Jun 2025

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

9 Jun 2025 - 4 Jul 2025

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Use and terminate a range of cables, such as single and multicore cables, screened cables, fire resistant and armoured cables.

16 - 17 Jun 2025

2 days, 8:00 AM - 4:30 PM

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

16 - 27 Jun 2025

2 weeks, 8:00 AM - 4:30 PM

CISRS Trainee Scaffolder card holders will be considered a trainee scaffolder regardless of the experience they have within the scaffolding industry. Accordingly, they should not undertake any scaffolding activities unless they are under the direct supervision of a qualified scaffolder. The Trainee will be expected to complete the following training within the validity of 2 x 18 month CISRS Trainee Scaffolder Cards: • COTS • CISRS Part 1 • CISRS Part 2 • NVQ Level 2/ SCQF Level 5 • CISRS 1 Day Skills Test

23 Jun 2025 - 18 Jul 2025

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Carry out the assembly of a range of electronic components such as resistors (fixed and variable), capacitors (fixed and variable), diodes, transistors and other semiconductor devices, integrated circuits (analogue and digital), miniature transformers, switches, indicators, wire links and a range of connectors, spacers and brackets to form various types of circuits.

23 Jun 2025 - 11 Jul 2025

3 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare the welding equipment and to ensure that all leads/cables, shielding gas system, hoses and wire feed mechanisms are securely connected and free from damage. They will also need to obtain and check that all the work holding equipment is in a safe and usable condition.

Mon 23 Jun 2025

9:00 AM - 12:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Mon 23 Jun 2025

1:00 PM - 4:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Tue 24 Jun 2025

9:00 AM - 12:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Tue 24 Jun 2025

1:00 PM - 4:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Wed 25 Jun 2025

9:00 AM - 12:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Wed 25 Jun 2025

1:00 PM - 4:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Thu 26 Jun 2025

9:00 AM - 12:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Thu 26 Jun 2025

1:00 PM - 4:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

Fri 27 Jun 2025

9:00 AM - 12:00 PM (3 hours)

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

30 Jun 2025 - 11 Jul 2025

2 weeks, 8:00 AM - 4:30 PM

A CISRS Advanced Scaffolder Card Holder is deemed competent to lead a scaffold gang in all scaffold operations, including complex design structures. The Advanced Scaffold training is the first step in this process.

30 Jun 2025 - 25 Jul 2025

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.