Training schedule

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare the welding equipment and to ensure that all leads/cables, shielding gas system, hoses and wire feed mechanisms are securely connected and free from damage. They will also need to obtain and check that all the work holding equipment is in a safe and usable condition.

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

On this course, you will learn to Identify and use basic electrical components. This course covers: • Isolating and testing supplies in line with the requirements of the EaWR and GS 38 • Using common electrical test instruments safely and efficiently • Reading typical electrical drawings • Reading motor rating plates • Identifying and connecting industrial motors

Delegates will learn the basic principles of Hydraulics Systems/ Mechanical devices Removing fitting and adjusting. This course covers: • Bearings: Recognise defects • Remove a range of plain, ball and roller bearings • Select and correctly fit a range of bearings • Belt and Chain drive mechanisms • Shafts and couplings including alignment • Drive Keys • Clutches and gear systems

A 1 day course covering the principles of measurement using a range of instruments commonly used in the Engineering industry. Method of Delivery: • Lecture • Demonstrations • Practical exercises There will be an assessment at the end which will require observation and questioning

Our welding principles course covers the practical and theoretical aspects of welding. Method of assessment: • Observation • Questioning

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

This course is designed to help engineers know the correct procedure to perform a safe isolation by following guidance from the BS7671 18th Edition Wiring Regulations.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the hand fitting activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required fitting activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to Prepare for the maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare for the electrical maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Use and terminate a range of cables, such as single and multicore cables, screened cables, fire resistant and armoured cables.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the programmable controller wiring and testing activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how you intend to carry out the activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able prepare and use CNC turning machines, that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Cover a broad range of basic sheet (up to and including 3 mm) metalworking competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to cover a broad range of basic grinding competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare the welding equipment and to ensure that all leads/cables, shielding gas system, hoses and wire feed mechanisms are securely connected and free from damage. They will also need to obtain and check that all the work holding equipment is in a safe and usable condition.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare and use manual tungsten inert gas (TIG) or plasma-arc welding equipment, that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the apprentice can demonstrate that they are competent in being able to covers a broad range of basic manual metal arc (MMA) welding competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the apprentice can demonstrate that they are competent in being able to cover a broad range of basic heavy platework (above 3 mm) competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will rovide a basis for the development of additional skills and occupational competences in the working environment.

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

This unit provides students with the skills required to produce statements of profit or loss and statements for financial position for sole traders and partnerships, using a trial balance. This unit also explores tax processes that influence the daily operations of businesses and is designed to develop students’ skills in understanding, preparing and submitting Value Added Tax (VAT) returns to HM Revenue and Customs (HMRC).

This unit provides students with an understanding of the business, its environment and the influences that this has on an organisation’s structure, the role of its accounting function and its performance. Students will examine the purpose and types for businesses that exist and the rights and responsibilities of the key stakeholders, as well as gain an understanding of the importance of professional ethics and ethical management within the finance function.

This unit provides students with the skills required to produce statements of profit or loss and statements for financial position for sole traders and partnerships, using a trial balance. Students will gain the double-entry bookkeeping skills needed to record financial transactions into an organisation’s accounts using a manual bookkeeping system.

Our Accountancy courses cover a range of crucial accounting duties including bookkeeping, purchase/sales ledger, balancing accounts, banking and auditing before moving on to drafting financial statements and maintaining financial records. Our Accountancy courses give you practical, internationally recognised finance and accountancy skills that can open doors for you in any industry across the world.

This unit provides students with the knowledge and skills needed to understand the role of management accounting in an organisation, and how organisations use such information to aid decision making. Students will learn the principles that underpin management accounting methodology and techniques, how costs are handled in organisations and why organisations treat costs in different ways.

This unit explores tax processes that influence the daily operations of businesses and is designed to develop students’ skills in understanding, preparing and submitting Value Added Tax (VAT) returns to HM Revenue and Customs (HMRC). The unit provides students with the knowledge and skills that are needed to keep businesses, employers and clients compliant with laws and practices that apply to VAT and payroll.

This unit allows students to understand how the budgetary process is undertaken. Students will be able to construct budgets and then identify and report on both areas of success and on areas that should be of concern to key stakeholders. Students will also gain the skills required to critically evaluate organisational performance.