Training schedule

This course certifies an individual's capability to perform a particular welding method by testing the ability to demonstrate the chosen method correctly. Training 2000 offer Tungsten Inert Gas (TIG), Manual Metal Arc (MMA), Metal Active Gas (MAG) and Metal Insert Gas (MIG) welding and cutting training, with testing codes including ISO 9606 series & BS 4872 and ASME BPVC Section IX.

This course certifies an individual's capability to perform a particular welding method by testing the ability to demonstrate the chosen method correctly. Training 2000 offer Tungsten Inert Gas (TIG), Manual Metal Arc (MMA), Metal Active Gas (MAG) and Metal Insert Gas (MIG) welding and cutting training, with testing codes including ISO 9606 series & BS 4872 and ASME BPVC Section IX.

This course certifies an individual's capability to perform a particular welding method by testing the ability to demonstrate the chosen method correctly. Training 2000 offer Tungsten Inert Gas (TIG), Manual Metal Arc (MMA), Metal Active Gas (MAG) and Metal Insert Gas (MIG) welding and cutting training, with testing codes including ISO 9606 series & BS 4872 and ASME BPVC Section IX.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare the welding equipment and to ensure that all leads/cables, shielding gas system, hoses and wire feed mechanisms are securely connected and free from damage. They will also need to obtain and check that all the work holding equipment is in a safe and usable condition.

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

On this course, you will learn to Identify and use basic electrical components. This course covers: • Isolating and testing supplies in line with the requirements of the EaWR and GS 38 • Using common electrical test instruments safely and efficiently • Reading typical electrical drawings • Reading motor rating plates • Identifying and connecting industrial motors

Delegates will learn the basic principles of Hydraulics Systems/ Mechanical devices Removing fitting and adjusting. This course covers: • Bearings: Recognise defects • Remove a range of plain, ball and roller bearings • Select and correctly fit a range of bearings • Belt and Chain drive mechanisms • Shafts and couplings including alignment • Drive Keys • Clutches and gear systems

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able prepare and use CNC turning machines, that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare for the electrical maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Carry out the assembly of a range of electronic components such as resistors (fixed and variable), capacitors (fixed and variable), diodes, transistors and other semiconductor devices, integrated circuits (analogue and digital), miniature transformers, switches, indicators, wire links and a range of connectors, spacers and brackets to form various types of circuits.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the hand fitting activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required fitting activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to cover a broad range of basic grinding competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to Prepare for the maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare the welding equipment and to ensure that all leads/cables, shielding gas system, hoses and wire feed mechanisms are securely connected and free from damage. They will also need to obtain and check that all the work holding equipment is in a safe and usable condition.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

This unit identifies the training and development required in order that the apprentice can demonstrate that they are competent in being able to covers a broad range of basic manual metal arc (MMA) welding competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the apprentice can demonstrate that they are competent in being able to cover a broad range of basic heavy platework (above 3 mm) competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will rovide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the programmable controller wiring and testing activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how you intend to carry out the activities and the sequence of operations they intend to use.

A 1 day course covering the principles of measurement using a range of instruments commonly used in the Engineering industry. Method of Delivery: • Lecture • Demonstrations • Practical exercises There will be an assessment at the end which will require observation and questioning

This course is designed to help engineers know the correct procedure to perform a safe isolation by following guidance from the BS7671 18th Edition Wiring Regulations.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Cover a broad range of basic sheet (up to and including 3 mm) metalworking competences that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare and use manual tungsten inert gas (TIG) or plasma-arc welding equipment, that will prepare them for entry into the engineering or manufacturing sectors, creating a progression between education and employment, or that will provide a basis for the development of additional skills and occupational competences in the working environment.

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.

Our welding principles course covers the practical and theoretical aspects of welding. Method of assessment: • Observation • Questioning

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Use and terminate a range of cables, such as single and multicore cables, screened cables, fire resistant and armoured cables.

The BTEC Level 4 HNC Qualification in Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment. Candidates will be required to attend Training 2000 one day a week. You can choose either a Tuesday or Friday once booked.

The BTEC Level 4 HNC Qualification in Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment. Candidates will be required to attend Training 2000 one day a week.

The BTEC Level 4 HNC Qualification in Manufacturing Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment. Candidates will be required to attend Training 2000 one day a week. You can choose either a Tuesday or Friday once booked.

The BTEC Level 4 HNC Qualification in Manufacturing Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment.

The BTEC Level 4 HNC Qualification in Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment. Candidates will be required to attend Training 2000 one day a week. You can choose either a Tuesday or Friday once booked.

The BTEC Level 4 HNC Qualification in Engineering is a higher-level programme aimed at developing a greater understanding and technical capability of engineering processes. We provide employees with more than just a qualification. We develop both their industry skills and knowledge for immediate application in the workplace which maximises return on investment. Candidates will be required to attend Training 2000 one day a week.

Delivering high level, industry-led training courses is what we do. As an engineering provider of advanced technical and academic skills, we work closely with employers to nurture and develop the employees they need for the future. Candidates will be required to attend Training 2000 one day a week. You can choose either a Tuesday or Friday once booked.

This course is for people who hold a CISRS Inspection Card (or previous equivalent) or a CISRS Scaffolder Card for at least two years, or hold a CISRS Advanced Scaffolder Card (gold card). You will learn the appropriate safety regulations and develop the ability to interpret design specifications and statutory regulations when inspecting complex/designed scaffolding structures for faults. You'll gain the CISRS Advanced Scaffolding Inspection Training Scheme (SITS Advanced) certificate on passing the course

A CISRS Advanced Scaffolder Card Holder is deemed competent to lead a scaffold gang in all scaffold operations, including complex design structures. The Advanced Scaffold training is the first step in this process.

The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Advanced Scaffolder card. Upon completion of this course, the operative will receive a CISRS Advanced Scaffolders Card. Valid for 5 years.

This course is intended for CISRS Scaffold card holders or for inspection card renewals, and also for those responsible for inspecting and checking basic scaffolds for safe use, signing certificates and registers in accordance with statutory regulations. You should have awareness and experience of scaffolding structures, coming from time spent in your individual industry sector. You’ll be required to confirm this experience by producing a CV. At the end of the course you'll gain a CISRS Scaffolding Inspecti

The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Scaffold card. Upon completion of this course, you will receive a CISRS Scaffolders Card. Valid for 5 years.

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.