Upcoming training courses

10 Mar 2026 - 7 Apr 2026

5 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

10 Mar 2026 - 7 Apr 2026

5 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.

Wed 11 Mar 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Wed 11 Mar 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

16 - 20 Mar 2026

1 week

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

16 - 27 Mar 2026

2 weeks, 8:00 AM - 4:30 PM

A CISRS Advanced Scaffolder Card Holder is deemed competent to lead a scaffold gang in all scaffold operations, including complex design structures. The Advanced Scaffold training is the first step in this process.

17 - 18 Mar 2026

2 days, 8:00 AM - 4:30 PM

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

Mon 23 Mar 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

Wed 25 Mar 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Wed 25 Mar 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

7 - 8 Apr 2026

2 days, 8:00 AM - 4:30 PM

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

Tue 7 Apr 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

Wed 8 Apr 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Scaffold card. Upon completion of this course, you will receive a CISRS Scaffolders Card. Valid for 5 years.

9 Apr 2026 - 7 May 2026

5 Days Over 5 weeks

To meet the demands of today’s scaffolding industry; CISRS provides Supervisor/ Manager training. This training is tailored to deliver the knowledge and management skills required in contract scaffolding

Thu 9 Apr 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The Scaffolding NVQ Level 2 Portfolio day must be completed to achieve a Level 2 NVQ Diploma in Accessing Operations and Rigging - Scaffolding qualification. The training has been developed for delivery in a working environment and delegates must therefore be employed to study this qualification. This qualification enables delegates to work in Accessing Operations and Rigging within the construction industry by demonstrating competence in a real workplace environment.

13 Apr 2026 - 8 May 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare for the electrical maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

13 Apr 2026 - 8 May 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to Prepare for the maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

13 Apr 2026 - 8 May 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the programmable controller wiring and testing activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how you intend to carry out the activities and the sequence of operations they intend to use.

13 Apr 2026 - 8 May 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.

Wed 15 Apr 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Wed 15 Apr 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

27 Apr 2026 - 1 May 2026

1 week

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

27 Apr 2026 - 8 May 2026

2 weeks, 8:00 AM - 4:30 PM

The 10-day Part 2 course is the second part of the required CISRS training for the Scaffolder card. Part 2 can only be accessed when Part 1 has been successfully completed, and 6 months experience has been gained following the Part 1 course. A second Trainee card can be applied for.

28 - 29 Apr 2026

2 days, 8:00 AM - 4:30 PM

The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Advanced Scaffolder card. Upon completion of this course, the operative will receive a CISRS Advanced Scaffolders Card. Valid for 5 years.

Wed 29 Apr 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Wed 29 Apr 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Tue 5 May 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

11 - 12 May 2026

2 days, 8:00 AM - 4:30 PM

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

11 - 22 May 2026

2 weeks, 8:00 AM - 4:30 PM

CISRS Trainee Scaffolder card holders will be considered a trainee scaffolder regardless of the experience they have within the scaffolding industry. Accordingly, they should not undertake any scaffolding activities unless they are under the direct supervision of a qualified scaffolder. The Trainee will be expected to complete the following training within the validity of 2 x 18 month CISRS Trainee Scaffolder Cards: • COTS • CISRS Part 1 • CISRS Part 2 • NVQ Level 2/ SCQF Level 5 • CISRS 1 Day Skills Test

Thu 14 May 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Thu 14 May 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

18 May 2026 - 19 Jun 2026

5 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

18 May 2026 - 12 Jun 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Use and terminate a range of cables, such as single and multicore cables, screened cables, fire resistant and armoured cables.

Thu 28 May 2026

8:30 AM - 11:30 AM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

Thu 28 May 2026

1:00 PM - 4:00 PM (3 hours)

Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

1 - 2 Jun 2026

2 days, 8:00 AM - 4:30 PM

From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

Mon 1 Jun 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

1 - 26 Jun 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Carry out the assembly of a range of electronic components such as resistors (fixed and variable), capacitors (fixed and variable), diodes, transistors and other semiconductor devices, integrated circuits (analogue and digital), miniature transformers, switches, indicators, wire links and a range of connectors, spacers and brackets to form various types of circuits.

1 - 26 Jun 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to Prepare for the maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

1 - 26 Jun 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Use and terminate a range of cables, such as single and multicore cables, screened cables, fire resistant and armoured cables.

8 - 12 Jun 2026

1 week

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

8 Jun 2026 - 3 Jul 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the programmable controller wiring and testing activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how you intend to carry out the activities and the sequence of operations they intend to use.

15 - 26 Jun 2026

2 weeks, 8:00 AM - 4:30 PM

CISRS Trainee Scaffolder card holders will be considered a trainee scaffolder regardless of the experience they have within the scaffolding industry. Accordingly, they should not undertake any scaffolding activities unless they are under the direct supervision of a qualified scaffolder. The Trainee will be expected to complete the following training within the validity of 2 x 18 month CISRS Trainee Scaffolder Cards: • COTS • CISRS Part 1 • CISRS Part 2 • NVQ Level 2/ SCQF Level 5 • CISRS 1 Day Skills Test

29 Jun 2026 - 10 Jul 2026

2 weeks, 8:00 AM - 4:30 PM

This unit covers CNC turning

29 Jun 2026 - 24 Jul 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to prepare for the electrical maintenance activities by obtaining all necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required maintenance activities and the sequence of operations they intend to use.

29 Jun 2026 - 24 Jul 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Prepare for the hand fitting activities by obtaining all the necessary information, documentation, tools and equipment required, and to plan how they intend to carry out the required fitting activities and the sequence of operations they intend to use.

13 - 17 Jul 2026

1 week

This City & Guilds 2382-22 – 18th Edition Course is essential for anyone who works or is involved with electrical installations, especially those who work within the domestic and commercial markets.

Tue 14 Jul 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

This course certifies an individual's capability to perform a particular welding method by testing the ability to demonstrate the chosen method correctly. Training 2000 offer Tungsten Inert Gas (TIG), Manual Metal Arc (MMA), Metal Active Gas (MAG) and Metal Insert Gas (MIG) welding and cutting training, with testing codes including ISO 9606 series & BS 4872 and ASME BPVC Section IX.

Mon 20 Jul 2026

1 day, 8:00 AM - 4:30 PM (8 hours 30 minutes)

The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Scaffold card. Upon completion of this course, you will receive a CISRS Scaffolders Card. Valid for 5 years.

20 - 21 Jul 2026

2 days, 8:00 AM - 4:30 PM

The aim of this course is for Scaffolding Managers and Supervisors who require renewal of their CISRS Scaffolding Supervisor card. It aims to review the core management skills required to effectively supervise scaffold operations.

27 Jul 2026 - 28 Aug 2026

5 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

27 Jul 2026 - 28 Aug 2026

5 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out turning operations on machines such as centre lathes, capstan or turret lathes, automatic or other specific turning machines.

3 - 28 Aug 2026

4 weeks, 8:00 AM - 4:30 PM

This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Carry out the assembly of a range of electronic components such as resistors (fixed and variable), capacitors (fixed and variable), diodes, transistors and other semiconductor devices, integrated circuits (analogue and digital), miniature transformers, switches, indicators, wire links and a range of connectors, spacers and brackets to form various types of circuits.